Drivers Arcus USB Devices

admin



  • USB 2.0 and RS-485 communication. Built in X and Y axis microstep drivers (1.5 Amp/8 microstep/24 VDC) Trapezoidal or s-curve acceleration. On-the-fly speed change. XY linear coordinated motion. Homing using Home and/or Index encoder channel. Opto-isolated +Limit, -Limit, and Home inputs per axis.
  • Enter a model name or select a product to find drivers, manuals, warranty information and more. Sync file between devices and share data to friends. Windows 10 - How to enter BIOS configuration? Notebook How to boot the system from USB flash drive/CD-ROM Motherboard AI Suite 3 - Introduction Notebook Smart.
  • Arcus support downloads. Servo Stepper Motor / Controller » Single Axis Servo Motor Driver and Controller.
Usb

With a USB-C connection, you can charge your Windows 10 PC, and you can also connect to other USB Type-C devices such as mobile phones, docking stations, display adapters, and other devices that have a USB-C port. Arcus PerforMax software: Arcus Drivers and Tools, Arcus USB Series and Arcus Performax Series software (needed to install device drivers). Zurich Instruments: manufacturer provided software and Python libraries. The list might be incomplete, and it does not include drivers for all USB devices.

Drivers Arcus Usb Devices Type C

If you want to run or are already running HomeAssistant on your Synology NAS DSM 6.2, it’s possible that you’d want to use a Z-Wave or ZigBee stick to communicate with their respective devices. When I initially got my HA running in a docker on the NAS, I was disappointed when HA created errors when I configured the stick as I previously had it working on my previous docker host. With a bit of digging, it turns out the Synology NAS was not recognizing the USB stick as a serial communication device. This is because out-of-box, there are no cp210x drivers installed that are necessary for my combo Z-Wave/Zigbee stick. Similarly, if you plan on using the Aeotec, you will need the cdc–acm driver and Conbee will require ftdi_sio. If you haven’t purchased your stick of choice yet, I’d recommend the GoControl stick as it does in one what the others do together, for less money than either of the other sticks. (Disclaimer: I’ve only physically tested this on my combo stick, so if you run into issues or find other solutions, ping me so I can update this post)

Drivers Arcus USB Devices

While I’ve got a ton of Windows experiences (20+ year), a lot of Mac experience (10ish years), I’m basically a newb when it comes to Linux. So for me, the next challenge was figuring out what/how the drivers would be packaged and how to obtain and install them. Aftermore time googling than I’d like to admit, I came across www.jadahl.com that is managed by Jumbotroll. He has figured out how to create custom packages with drivers for most if not all versions of Synology hardware. Feel free to drop him a donation through his paypal as his efforts shouldn’t go unnoticed.

Hardware:

  • GoControl Z-Wave + Zigbee HUSBZB-1 [ Amazon ]
  • Aeotec Z-Stick Gen5 [ Amazon ]
  • Conbee ZigBee gateway [ Amazon ]

Steps to get it working:

  1. Goto Jumbotroll’s website and download the drivers for your DSM version, currently 6.2 (make sure your DSM matches the minimum DSM version he has listed on the download page).
    You will need the model of your Synology hardware. To get this, you can look at the box that you probably threw away, the receipt that buried in some email, or by SSH’ing into the NAS and running uname -a which will output something like Linux Hyperion 4.4.59+ #23824 SMP PREEMPT Tue Dec 25 18:27:57 CST 2018 x86_64 GNU/Linux synology_broadwellnk_3018xs.
    Save the file to whatever device you will be running the commands from, in my case, it’s my Macbook.
  2. Log into your DSM through the webpage (typically <LAN IP>:5000). Open the Package Center, then click on Manual Install, and select the file you just downloaded on your local machine. Click Next and install the package.
  3. Plugin the USB stick into the NAS and reboot it.
  4. If all goes as planned, you will have a working and recognized USB stick.

Integration into the HomeAssistant docker

  1. Find out which ports your USB stick is mounted to
    1. SSH into the NAS
    2. Execute dmesg|greptty which will show you where the drivers were mounted
      --device /dev/ttyUSB0:/zwaveusbstick --device /dev/ttyUSB1:/zigbeestick
    3. Some users have reported errors that may require you to add --privileged flag.

Configuring HomeAssistant

  1. Edit your configuration.yaml file and add the following: